Command and control units
AC9010 Display unit
Description
The AC 9010 display unit is designed to be associated with our control units AC 9030, AC 9040 and AC 9050 inside automated control system for servo-controlled supports in applications such as antenna measurement, aerial flightpath analysis or earth station for satellite.
In a reduced volume, it gives the display of 3 positions of circular or linear axes controlled by one or our control units.
AC9030 Control unit
Description
The AC 9030 control unit is dedicated to the animation of multiaxis positioners in the field of antenna measurement or measurement of any device needing a characterization of its spatial transfer function. Connected with a computer, it relieves the measurement software of its movement management and acquisition synchronization tasks.
Strong points
This unit was originally designed to work with the ACC positioners to grant to user an homogeneous and performing solution. However, its great modularity allows it fitting all existing measurement positioners, whatever their motorization or type of position sensor may be. It is completely compatible with the IEEE 488 and RS 232 standards and can be connected inside computing and instrumentation assemblies without disturbing their operation.
AC9031 Power unit
Description
The AC 9031 power unit is dedicated to the animation of multiaxis posiitoners in the field of antenna measurement or measurement of any device needing a characterization of its spatial transfer function.
It supplies the motors with the required power and protects them according to their electromechanical and thermal characteristics. Connected with an AC 9030 control unit, it forms a coherent and reliable systsem.
Strong points
- Able to control from 1 to 12 direct current motors with various characteristics in homogeneous or heterogeneous configurations
- Provides the cabled safety functions associated with end of travel limit switches fitted on the positioner
- Provides the switching of one or several power amplifiers towards different axes, thus allowing a simultaneous operation of these axes.
AC9032 Control unit
Description
The AC 9031 power unit is dedicated to the animation of multiaxis posiitoners in the field of antenna measurement or measurement of any device needing a characterization of its spatial transfer function.
It supplies the motors with the required power and protects them according to their electromechanical and thermal characteristics. Connected with an AC 9030 control unit, it forms a coherent and reliable systsem.
Strong points
- Able to control from 1 to 12 direct current motors with various characteristics in homogeneous or heterogeneous configurations
- Provides the cabled safety functions associated with end of travel limit switches fitted on the positioner
- Provides the switching of one or several power amplifiers towards different axes, thus allowing a simultaneous operation of these axes.